It is no wonder that the workers on the construction site are exposed to several types of risks. These experts are well aware of all the potential risk factors and that is why they adopt every sort of measure to keep the accidents at bay. The heavy power tools that are used for concrete cutting and drilling purpose are very dangerous. Proper attention must be paid while working with these to perform the various cutting and drilling tasks on the construction site. Some of the common hazards are mentioned below along with their solutions. Have a read!
Make sure to maintain and position the guards of the saw blades perfectly. Keep these blades properly fixed. Also, there are different blades for the different tasks, so choose the perfect one keeping the task in mind.
Generally, the professionals make the use of diamond blades because they provide a lot of benefits. Such blades are better than the abrasive blades in many ways. Also, the diamond blades are an affordable option. These blades must be used in a proper way for the effective results. If you ignore that aspect, the blades will break.
Before you start working with them, inspect whether diamond blades are in good condition or not. To check this, hit it with a wooden stick. Keep in mind that a damaged blade produces a ringing sound. The experts inspect the blades on a regular basis to avoid the risks.
When it comes to mounting the blade of the saw, it appears to be an easy task but it is not so. It must be done very carefully. Unplug the machine first and then secure the arbour. This will keep the blades on its position when the saw is switched on. These tips will help in dealing with the saw blades in a secured way.
The construction site experiences loud noises during the concrete cutting and drilling. This can adversely affect the hearing capacity of the human beings. Not only this, the production of low levels of noise for a long period of time is also harmful. To tackle this situation, such types of tools are used that limit the noise production effectively.
The presence of water can be really dangerous when the concrete cutting is going on. The reason behind this is the electricity. To tackle the accidents that are caused due to the electricity, vacuum cleaners are used. The experts make the use of petrol engine and hydraulic powered equipment in place of electric machines in case of wet cutting.
The concrete cutting not only leads to the production of loud noises but also dust and gases which pollutes the environment and also affects the human health. It gives birth to many respiratory diseases. To restrict the production of both dust and gases, use such tools that produce less dust. Also, it is important for the workers to use the respiratory guards to keep their lungs safe.
In kickback, the saw backs off towards the worker. This is caused due to the obstruction to the tip of the blade. Whereas in the locking in, the blade gets stuck in the concrete and therefore gets pulled off in the opposite direction of the worker.
Both these scenarios are very dangerous and that is why the experienced workers adopt the safety measures to stay safe and secure. To prevent kickback, let the blade spin at its maximum speed before starting the procedure of concrete cutting. To avert locking, it becomes important to secure the concrete piece.
The safety measures that are mentioned above help in keeping the workers safe from the accidents. These safety standards must be reviewed from time to time and the necessary changes must also be made in them if required. It is advised to check the power tools regularly.
This is now obvious that a beginner or an amateur worker needs to work on the techniques of handling the power tools before starting the actual work. It is better to leave this on an expert who has years of experience in concrete cutting and drilling.