Myths About Diamond Drilling and Diamond Sawing

Using diamonds in the drill bits and saws has been a common practice for a long time now. Diamond drilling and sawing is a boon to the industry and has increased the productivity and ease of the task exponentially. Though the practice has gained popularity because of its proficiency, there are always certain myths and misconceptions floating around about the job. When a contractor invests in a diamond drill bit or a saw, they often wear it out ahead of its standard life span due to the lack of proper knowledge about the latest instruments. Apart from the operators, there is confusion about the concrete cutting process even among the layman as ‘diamond’ and ‘drilling’ are rarely heard together in one sentence outside of the industry.

Learn About Diamond Drilling and Sawing

In order to bust some myths about concrete cutting, we need to understand the process of diamond drilling and sawing. There are instruments called drill bits that are adorned with fine diamonds, not for the sake of embellishment but because it is the hardest material in the world. Hence, there is a good use of such diamond-clad instruments for cutting through extremely hard substances like concrete with utter ease and precision. Diamond drilling can be used for resting a particular sized hole through the slabs as well as for exploration purposes like core drilling. Diamond sawing, on the other hand, is extremely effective for cutting through concrete structures of varying masses.

Myth 1: Concrete Cutting is Messy

This is a complete misconception in the case of diamond drilling through concrete. The process leaves little debris behind and there is very little dust mess created on the site. Having minimal rummage after the procedure is one one the most desirable advantages of the whole diamond drilling through the concrete process. Some dust that is created, can easily be minimized using various tips like water.

Myth 2: No Special Training is Required for Operation

Some might think that it is the same as operating a mechanical drilling machine, but diamond drilling requires quite a lot of specialized training about the equipment and the handling to be able to use it meaningfully whenever required. As and when diamond drill bits become a common part of people’s everyday toolbox, it is necessary to stress the fact that everyone should seek some advice and training about their function and maintenance beforehand too ensure the longevity of the same. Other than the mechanism, the operators also need to understand the safety measures and precautions that should be taken to avoid any risks of damage.

Myth 3: One Blade Suits All

This statement is the farthest from the truth. Yes, diamond blades are versatile and can saw through various different kinds of materials. But, No, a singular blade is not bestowed with the appropriate specifications to cut through different material. Each blade is manufactured with a designated purpose and comes with different chip size for crystals, mesh size, and also the number of diamonds. One can choose the appropriate diamond saw blade based on the style, grade, and cutting requirements of the job at hand.

Myth 4: Cutting With Water Makes Blades Last Longer

Wet cutting is a common practice when using a diamond saw blade. It is really beneficial for obtaining a clean and precise cut and having beyond ar outcomes. However, the fact that it will help increase the blade’s life is dubious. It does help in evading the wear and tear that might occur due to the production of heat during the process, but it is contrasted by the creation of abrasive slurry which can add a bit of wear to the saw blade. The use of water is recommended by all the guidelines as it prevents dust and warping of the blade due to overheating.

In Conclusion, Conduct Research and Learn Facts

Diamond drilling and sawing are known to be extremely efficient, noise-free, non-percussive, and accurate ways of drilling holes and cutting into concrete. The drill bits come in different sizes and can vary from small to large as per the job’s requirements. Read about these facts in detail and then put the theory into practice for accurate results. The myths can lead someone astray but fact-checks can always help in figuring out the correct method, tool, or material for concrete cutting.

  • Search
  • Archives